Flatbeds
Steel and aluminum flatbeds for single and dual rear wheel trucks, sized to your cab-to-axle.
Flatbed options →Design / Fabrication / Installation
3 Custom Solutions designs, fabricates and installs flatbeds, service bodies, crane bodies, hitches and work equipment for pickups and commercial trucks. We build it right the first time, so your truck is back on the job fast.
What we do
From the first measurement to the final walkthrough, your truck stays with one crew in Krum.
We look at your truck and how you work, then spec or draw up the bed, body or equipment that fits.
When an off-the-shelf part won't do, we build it: custom mounts, racks, brackets and layouts.
We mount it, wire it and check it, so your truck is ready to go back to work.
Portfolio
Completed trucks from our Krum shop.
Completed trucks
Tap a photo to see it full size.
Tap a photo to see it full size.
Tap a photo to see it full size.
Tap a photo to see it full size.
Tap a photo to see it full size.
Tap a photo to see it full size.
Tap a photo to see it full size.
Tap a photo to see it full size.
More completed trucks coming soon.
Services
Beds, bodies, hitches and equipment for pickups and commercial trucks, designed, fabricated and installed in our Krum shop.
What we build & install
From a single toolbox to a full custom upfit, we design it, fabricate what's needed and handle the install.
Steel and aluminum flatbeds for single and dual rear wheel trucks, sized to your cab-to-axle.
Flatbed options →Utility and service bodies with side compartments to keep tools organized and locked up.
Service body options →Electric and hydraulic service cranes on reinforced bodies, sized to your truck and what you lift.
Crane body options →Electric and hydraulic cranes mounted on your current truck or body, with the reinforcement to back them up.
Crane options →Crossover and underbody toolboxes, headache racks and ladder racks.
LED work and warning lights, strobes and other add-ons wired cleanly into your truck.
Spray-in bed liner for truck beds, flatbed decks and service bodies, applied in our own spray booth.
Spray liner details →Window tint done in our own shop, so your truck can get its upfit and tint in one stop.
Flatbeds
Steel and aluminum flatbeds for single and dual rear wheel trucks, built to fit your truck and set up for how you haul.
Flatbeds
Tap a photo to see it full size.
A flatbed replaces your pickup bed with a flat deck you can load from the sides or the back. Bed length follows your truck's cab-to-axle measurement, and width follows your rear wheels: single rear wheel trucks usually take a narrower bed than duallies.
| Cab-to-axle | Bed length |
|---|---|
| 56 in | 8½–9 ft |
| 60 in | 9 ft |
| 84 in | 11–12 ft |
Not sure of your measurement? Tell us the year, make and model and we'll figure it out.
Tough and affordable. A good fit for ranch, farm and heavy hauling work.
Lighter weight so you keep more payload, and they won't rust.
Set up with a gooseneck hitch and wiring for pulling stock, equipment and car trailers.
Skirted beds with built-in toolboxes or a layout you can't buy off the shelf. We can design and fabricate it.
Options we can add
Or call (469) 451-1213.
Halo Fab models we offer
Halo Fab welder beds, built for hauling and running welding and fabrication equipment.
Welders Bed with dual toolboxes, integrated fuel/air tank, headache rack with pipe/tubing rack, and rear vise mounts.
Welders Bed with dual toolboxes, integrated reel/port mount, and full-width rear light bar.
Tap a photo to see all photos of that model. Halo Fab photos and model info. Ask us for a quote on any model.
Authorized Halo Fab distributor
Halo Fab service bodies, enclosed service bodies, crane bodies and heavy duty bodies, sold and installed by our Krum shop. Pick a type below.
Tell us what you carry and how you work. We spec the body, build what needs to be custom, and install it on your truck.
Service bodies
Tap a photo to see it full size.
Tap a photo to see it full size.
Tap a photo to see it full size.
Tap a photo to see it full size.
Tap a photo to see it full size.
Tap a photo to see it full size.
Tap a photo to see it full size.
Tap a photo to see it full size.
Tap a photo to see it full size.
Tap a photo to see it full size.
Tap a photo to see it full size.
Tap a photo to see it full size.
Tap a photo to see it full size.
Tap a photo to see it full size.
Tap a photo to see it full size.
Tap a photo to see it full size.
Tap a photo to see it full size.
Tap a photo to see it full size.
Tap a photo to see it full size.
Models marked “Our build” are bodies we installed, shown in our own photos. The rest are Halo Fab models and photos. Ask us for a quote on any of them.
A service body replaces your pickup bed with locking side compartments, so tools and parts stay organized, dry and secure. The right size depends on your truck's cab-to-axle measurement, from the back of the cab to the center of the rear axle.
| Cab-to-axle | Body length | Common on |
|---|---|---|
| 56 in | 8 ft | Pickup cab & chassis |
| 60 in | 9 ft | 1-ton cab & chassis |
| 84 in | 11 ft | Larger cab & chassis |
Not sure of yours? Tell us the year, make and model and we'll figure it out.
Full-length side compartments with an open center bed. A good fit for plumbers, electricians and HVAC crews.
Taller sides and room for ladder and material racks for crews that haul bulky gear.
Heavy-duty body set up for a crane, air compressor and welder for field repair work.
Need a layout you can't buy off the shelf? We can design and fabricate it to fit how you work.
Options we can add
Or call (469) 451-1213.
An enclosed service body puts a fixed roof over the whole body, so tools, parts and stock stay dry and secure, with room to stand and work inside.
Enclosed service bodies
Tap a photo to see it full size.
Tap a photo to see it full size.
Tap a photo to see it full size.
Tap a photo to see it full size.
Models marked “Our build” are bodies we installed, shown in our own photos. The rest are Halo Fab models and photos. Ask us for a quote on any of them.
Or call (469) 451-1213.
A crane body puts a service crane on a reinforced body with locking compartments, so you can lift engines, parts and equipment where the work is.
Crane bodies
Tap a photo to see it full size.
Tap a photo to see it full size. The drawer packs aren't shown in these photos, so the drawer pack photo is from another build with the same 6-drawer pack.
Tap a photo to see it full size.
Tap a photo to see it full size.
Tap a photo to see it full size.
Tap a photo to see it full size.
Tap a photo to see it full size.
Tap a photo to see it full size.
Models marked “Our build” are bodies we installed, shown in our own photos. The rest are Halo Fab models and photos. Ask us for a quote on any of them.
Cranes are rated by how many pounds they can lift at a given reach. The right crane depends on what you lift and on your truck: its weight rating has to carry the crane, the body and the load, and the body has to be built to handle the lift.
| Truck | Typical crane |
|---|---|
| 1-ton (F-350, Ram 3500) | 3,000–4,000 lb |
| Class 4–5 (F-450/550, Ram 4500/5500) | 5,000–7,000 lb |
| Class 6 and up | 8,000 lb and up |
Exact capacity depends on your truck and how it's set up. We confirm it before we build.
Runs off the truck's batteries. A simple, lower-cost setup for lighter lifts on 1-ton and larger trucks.
For heavier, frequent lifts. Powered by the truck through a PTO or an electric-hydraulic pump.
Crane, air compressor and welder set up together for field repair and equipment service.
Need a different layout or a crane added to your current truck? We can design and fabricate it.
Options we can add
Or call (469) 451-1213.
Severe duty crane and service bodies, treater, delivery and combo trucks for heavy chassis, built from proven designs or designed custom around your fleet and where it works.
Halo Fab heavy duty bodies we offer
Tap a photo to see it full size. Halo Fab photos.
Heavy trucks do different jobs in different places, so we start with how your fleet works. We can build from an existing Halo Fab design or create a custom layout, then add the features that make the truck more useful on the job.
As an authorized Halo Fab distributor, we spec, sell and install the full heavy truck lineup in our Krum shop.
Built for heavy chassis and hard use, in nearly any layout you need.
Set up for your fleet and the conditions the truck works in.
Bodies laid out around how your team loads, hauls and unloads.
Usually custom, designed around your location and what the truck needs to do.
Or call (469) 451-1213.
Drawer packs
Halo Fab HALOK Series drawer packs keep tools and parts organized and easy to reach. We install them in service bodies and crane bodies, new or existing.
Halo Fab drawer packs we offer
Every Halo Fab drawer pack and storage add-on, sold and installed by our shop. Tap a model for details and photos.
Sized to slide into your body's side compartments. Filter by body width.
Tap a photo to see it full size.
Tap a photo to see it full size.
Tap a photo to see it full size.
Tap a photo to see it full size.
Tap a photo to see it full size.
Tap a photo to see it full size.
Tap a photo to see it full size.
Tap a photo to see it full size.
Tap a photo to see it full size.
Tap a photo to see it full size.
Photos coming soon. Ask us and we'll send you pictures.
Photos coming soon. Ask us and we'll send you pictures.
Tap a photo to see it full size.
Tap a photo to see it full size.
Tap a photo to see it full size.
Photos coming soon. Ask us and we'll send you pictures.
Photos coming soon. Ask us and we'll send you pictures.
Photos coming soon. Ask us and we'll send you pictures.
Photos coming soon. Ask us and we'll send you pictures.
Photos coming soon. Ask us and we'll send you pictures.
Photos coming soon. Ask us and we'll send you pictures.
Photos coming soon. Ask us and we'll send you pictures.
Photos coming soon. Ask us and we'll send you pictures.
Photos coming soon. Ask us and we'll send you pictures.
Photos coming soon. Ask us and we'll send you pictures.
Photos coming soon. Ask us and we'll send you pictures.
HALOK drawer systems, freestanding units for the open cargo deck.
Photos coming soon. Ask us and we'll send you pictures.
Photos coming soon. Ask us and we'll send you pictures.
Photos coming soon. Ask us and we'll send you pictures.
Photos coming soon. Ask us and we'll send you pictures.
Photos coming soon. Ask us and we'll send you pictures.
Photos coming soon. Ask us and we'll send you pictures.
Photos coming soon. Ask us and we'll send you pictures.
Compact add-on storage with LED lighting.
Tap a photo to see it full size.
Add-ons for your drawer packs.
Tap a photo to see it full size.
Tap a photo to see it full size.
Halo Fab models and photos. Ask us for a quote on any model.
A drawer pack mounts inside a body compartment so small parts, hand tools and fittings stay sorted instead of piling up on a shelf. Each drawer pulls out on slides and can be fitted with dividers.
We offer Halo Fab drawer packs from 2 to 8 drawers in front, mid and rear mounts, plus HALOK cargo area drawers. Many of our crane bodies run two 6-drawer packs, one on each side.
Our most common setup, standard on our crane bodies.
A shorter pack for smaller compartments, like on our 98-78-IHR.
Already have a service or crane body? We can fit drawer packs to your compartments.
Or call (469) 451-1213.
Cranes · Stellar & Venturo crane distributor
We're a Stellar and Venturo crane distributor. Already have the truck or the body? We can mount a service crane on it, build the reinforcement it needs, and wire and plumb it to run.
Cranes we install
Specs from Stellar Industries. Lifting capacity drops as the boom extends, so check the load chart for your lift.
Tap a photo to see it full size.
Specs from Stellar Industries. Lifting capacity drops as the boom extends, so check the load chart for your lift.
Tap a photo to see it full size.
Specs from Stellar Industries. Lifting capacity drops as the boom extends, so check the load chart for your lift.
Tap a photo to see it full size. The last two photos show it on one of our builds.
Picking a crane starts with the heaviest thing you lift and how far out you need to reach. Capacity drops as the boom extends, so a crane has to be sized for the load at the reach you actually use. Your truck's weight rating and the mounting point also have to handle it.
| Detail | Why it matters |
|---|---|
| Heaviest lift | Sets the crane's capacity |
| Reach needed | Capacity drops as the boom extends |
| How often you lift | Electric or hydraulic |
| Truck & GVWR | What the truck can safely carry |
| Current body | Where and how it mounts |
Don't know all of it? Tell us what you lift and what truck you drive, and we'll work out the rest.
Run off the truck's batteries. Good for lighter, occasional lifts without adding hydraulics.
Stronger and built for frequent lifting. Powered by the truck through a PTO or an electric-hydraulic pump.
We check your body and frame, add the reinforcement and mounting plate, and install the crane.
An odd truck or a special setup? We can design and fabricate the mount to fit.
Options we can add
Or call (469) 451-1213.
Stellar & Venturo distributor
Browse the full Stellar and Venturo crane lineups on their websites. Any crane you find there, we can sell you and install on your truck, including the body reinforcement and wiring it needs.
Found one you like? Send us the model and we'll quote it. Or call (469) 451-1213.
Parts & accessories
The parts and add-ons that finish a truck. Buy them for your own install, or have our Krum shop install them for you.
Or call (469) 451-1213.
Spray-in liners · Coming soon
We're building our own spray liner shop in Krum. Soon we'll coat beds, decks and bodies right here, so your truck can go from install to liner without leaving our shop.
A spray-in liner is a thick, textured coating that bonds to the metal. It protects against dents, scratches and rust, gives a non-slip surface, and seals out water, unlike a drop-in liner that can shift and trap moisture.
Full spray-in coverage for pickup beds, sides and tailgate, top rails optional.
Have your new flatbed or service body coated before it goes back on the road.
Decks, steps, bumpers, toolboxes and trailers that take a beating.
Other parts and surfaces. Tell us what you need and we'll look at it.
Why spray-in
Or call (469) 451-1213 to ask when we open.
Partners
We work with the manufacturers behind the equipment we put on your truck, so you get the full lineup, sized and installed by our Krum shop.
Authorized Stellar distributor
Browse Stellar's full lineup of electric, electric-hydraulic, hydraulic, T-boom and articulating cranes on their website. Anything you see there, we can sell you and install on your truck, including the body reinforcement and wiring it needs.
Found one you like? Send us the model and we'll quote it. Or call (469) 451-1213.
Authorized Venturo distributor
Venturo makes hydraulic, electric-hydraulic and electric cranes, crane service bodies, conversion and dump hoists, and crane and body accessories. Anything on their website, we can sell you and install on your truck.
Found one you like? Send us the model and we'll quote it. Or call (469) 451-1213.
Authorized Halo Fab distributor
Halo Fab builds service bodies, enclosed service bodies, crane bodies, heavy truck bodies and welder beds, plus drawer packs, bumpers and other options. Anything on their website, we can sell you and install on your truck.
Found one you like? Send us the model and we'll quote it. Or call (469) 451-1213.
Authorized WEATHER GUARD distributor
WEATHER GUARD makes truck tool boxes (saddle, side and underbed), truck and ladder racks, headache racks, transfer tanks, pull-out storage, and van shelving, storage modules, bulkheads and racks. Anything on their website, we can sell you and install on your truck or van.
Found one you like? Send us the part number and we'll quote it. Or call (469) 451-1213.
Authorized CM Truck Beds distributor
CM Truck Beds makes steel and aluminum flatbeds, service bodies and other truck beds for pickups and cab and chassis trucks, like the TM Deluxe on our flatbed page. Anything on their website, we can sell you and install on your truck.
Found one you like? Send us the model and we'll quote it. Or call (469) 451-1213.
Authorized Tommy Gate distributor
Tommy Gate makes liftgates for pickups, flatbed and stake trucks, and vans, including tuckunder and electric vehicle liftgates. Anything on their website, we can sell you and install on your truck.
Found one you like? Send us the model and we'll quote it. Or call (469) 451-1213.
Parts & accessories
Tell us what you're looking for and we'll check fit, availability and price. Call, stop by, or fill out the form and send it over.
Get a quote
Call us, stop by, or fill out the quote form and send it over.